Question) Hi Joe, do you have a kit for me?
Answer) Hello. Please scroll down to see if your model is listed
Then - click on Build a kit
EURO / SCAND / RUS / JAPAN (XP 800 Summit)
What ramp number is in your primary clutch? Do you have 441 ramp or do you have 413 ramp?
Most Non-North America ramps (800cc) is supposed to be 413, however many times the Skidoo or Lynx come with 441 ramp. Do not trust what the dealer may say what is installed unless the dealer has viewed the ramp with their own eyes. Many times I get a customer who open up the primary and the wrong ramp is installed.
NOTE; please check by opening up your primary clutch and look inside to find out what ramp number is installed as there is a substantial difference in price $$$ for kit.
DUAL ELEVATION KIT
The dual elevation kit is the low elevation kit (0'~3500')usually with an additional high elevation/lower engagement primary spring. When going from low elevation to high elevation, its as quick as changing out the low elevation primary spring and reducing the flyweight for the elevations mentioned on the supplied calibration sheet(s).
Example; a 2009 summit that runs low elevation 200/350 with 20g in clicker 4. To go to high elevation 3500~8000 feet then change to the 160/350 or 175/360(whichever supplied) and reduce the pinweight to 15.3g, maintain clicker 4. For higher than 8000 feet then go to 14.5g and maintain clicker 4
XP QRS install videos at youtube part 1,2,3,4.
REV / MXZ primary clutch install video part 1,2 pertains to TRA-2 and TRA-3 primary
440 calibration for 2004~2007 models with team tss98 and 04 secondary.
Low Elevation Trail kits are for 0'~3000' elevation. (0M~900M)
Click on the highlighted description for illustrations.
These kits are designed for use with the HPV27 secondary & helix .
The kits are not for the Formula helix which is 3.75" (95mm) diameter.
Take note for years 1999~2003 there are some models that come with the formula helix.
If you are not sure what you have, you can go to the sled and check the secondary, the model you need has an " Adjustment ring cam " with 3x 10mm bolts to hold the ring locked.
There are 6 notches on the sheave for deflection adjustment.
If still not sure what you have, then remove the secondary and measure across the diameter of the helix, it should be 4.25" (108mm) inches diameter
2011
Summit 800-ETEC ($275)
Use stock 441 Ramps. Use stock secondary spring.
Kit c/w (160/380), 14g~20g pin kit, new helix NC-D2
Sorry I dont have a kit finalized yet for the etec with 413 ramps.
Summit 800R-SP (441 ramps) ($275)
Use stock 441 ramps, use stock secondary spring.
Kit c/w 175/360 primary spring, 3900 engage, 14g~20g pin kit, QR11 helix
Summit 800R-SP (413 ramps) ($360)
Use stock 413ramps, use stock secondary spring.
Kit c/w 200/320 primary spring, 3900 engage, 14g~25g pin kit, QR11 helix
600RS kit c/w Joe's ramps, 250/460 primary spring, 11g~17g pin kit.
Use stock secondary spring, use helix with middle position xx-40-xx degrees.
-------------------------------------------------
2009~2010
Sorry no 500/600/1200 clutch kit available at this moment.
800 backcountry or trail "with deep lug 1.75" track only"
kit c/w 200/320 primary spring, 3900 engage, 225/300 secondary spring, 14g~25g pin kit, QR11 helix.
800 summit
For 441 ramps - kit c/w 200/350 primary spring, 3900 engage, 14g~20g pin kit, QR11 helix
For 413 ramps - kit c/w 200/320 primary spring, 3900 engage, 14g~25g pin kit, QR11 helix
600RS kit c/w Joe's ramps, 250/460 primary spring, 11g~17g pin kit.
Use stock secondary spring, use helix with middle position xx-40-xx degrees.
2008
Sorry no 500/600 clutch kit available. I have been developing other clutch products for the future so I just don't have the time to work on the 2 sleds mentioned.
800 regular trail and backcountry
kit c/w 200/320 primary spring, 3900 engage, 14g~25g pin kit, helix - use stock secondary spring
600 summit
800 summit
kit c/w 200/320(on 800) 200/350(on 600) primary spring, 3900 engage, 14g~25g pin kit, QR11 helix - use stock secondary spring
600RS kit c/w Joe's ramps, 250/460 primary spring, 11g~17g pin kit.
Use stock secondary spring, use helix with middle position xx-40-xx degrees.
2007
NOTE about 2007 secondary clutches. Some of the budget sport models (adrenaline) had a button secondary clutch
Know which secondary clutch you have *click*
(X model = S8R4 roller helix)
500SS (2007)
600
600 summit European model
800
kit c/w 230/350 primary spring, 4200 engage, 14g~25g pin kit, secondary spring, S8R4 helix (SMT button helix for adrenaline)
600 summit
800 summit kit c/w 200/350 primary spring, 3900 engage, 14g~25g pin kit, S8R4 helix - use stock secondary spring
1000 summit
kit c/w 200/320 primary spring, 3900 engage, 14g~25g pin kit, S8R7 helix - use stock secondary spring
Top of page
2006
NOTE about 2006 secondary clutches - Know which secondary clutch you have *click*
(X model = S8R4 roller helix)
600
600 summit (3900 engage)
800
kit c/w 230/350 primary spring, 4200 engage, 14g~25g pin kit, 225/300 secondary spring, SMT helix (adrenaline = button helix)
800 summit kit c/w 200/350 primary spring, 3900 engage, 14g~25g pin kit, SMT button helix - use stock secondary spring
1000 summit
kit c/w primary spring, 3900 engage, 14g~25g pin kit, button helix - use stock secondary spring
Top of page
2005
600
600 summit (3900 engage)
800
kit c/w 230/350 primary spring, 4200 engage, 14g~25g pin kit, 225/300 secondary spring, SMT2 helix
600/800 summit kit c/w 200/350 primary spring, 3900 engage, 14g~25g pin kit, SMT button helix - use stock secondary spring
1000 summit
kit c/w 200/320 primary spring, 3900 engage, 14g~25g pin kit, SMT helix - use stock secondary spring
Top of page
2004
600
600 summit (3900 engage)
800
kit c/w 230/350 primary spring, 4200 engage, 14g~25g pin kit, 225/300 secondary spring, SMT2 helix
600/800 summit
kit c/w 200/350 primary spring, 3900 engage, 14g~25g pin kit, SMT button helix - use stock secondary spring
Top of page
2003
600 RER
600 RER summit (3900 engage)
800 STD
800 RER
kit c/w 230/350 primary spring, 14g~25g pin kit, 225/300 secondary spring, SMT2 helix
800 RER summit
kit c/w 200/350 primary spring, 3900 engage, 14g~25g pin kit, SMT button helix - use stock secondary spring
440 REV Racer (BRP formula roller secondary)
kit c/w 250/460 primary spring, 4600 engage, 14g~20g pin kit, CPC-Blue/White secondary spring, S4X roller helix.
Top of page
2002
These models come stock with the BRP purple secondary spring BRP#414978300
809 MACH Z TECH PLUS kit c/w 230/380 primary spring, 4200 engage, 14g~25g pin kit, SMT2 helix - use stock secondary spring
600 RER
600 RER summit (3900 engage)
700 RER
800 RER
800 RER summit (3900 engage)
kit c/w 230/350 primary spring, 4200 engage, 14g~25g pin kit, SMT2 helix(trail sled) SMT helix(summit)- use stock secondary spring
440 MXZX Racer (BRP formula roller secondary)
kit c/w 250/460 pink primary spring, 4600 engage, 14g~20g pin kit, CPC Blue/White secondary spring, S4X roller helix.
Top of page
2001
809 MACH Z TECH PLUS
This model comes stock with the BRP purple secondary spring BRP#414978300
kit c/w 230/380 primary spring, 4100 engage, 14g~25g pin kit, SMT2 helix - use stock secondary spring
440 MXZX Racer (BRP formula roller secondary)
kit c/w 250/460 primary spring, 14g~20g pin kit, CPC-Blue/white secondary spring, S4X roller helix.
Top of page
2000
809 MACH ZR, ZLTR, ZMHR
This model comes stock with the BRP purple secondary spring BRP#414978300
kit c/w 230/380 primary spring, 4100 engage, 14g~25g pin kit, SMT2 helix - use stock secondary spring
440 MXZX Racer (BRP formula roller secondary)
kit c/w 250/460 primary spring, 4600 engage, 14g~20g pin kit, CPC Blue/White secondary spring, S4X roller helix.
Top of page
1999
809 MACH ZR, ZLTR, ZMHR
This model comes stock with the BRP purple secondary spring BRP#414978300
kit c/w 230/380 primary spring, 4100 engage, 14g~25g pin kit, SMT2 helix - use stock secondary spring
440 MXZX Racer (BRP formula roller secondary)
c/w 250/460 primary spring, 4600 engage, 14g~20g pin kit, CPC Blue/White secondary spring, S4X roller helix.
Top of page
1998
440 MXZX Racer (BRP formula roller secondary)
c/w 250/460 primary spring, 14g~20g pin kit, CPC Blue/white secondary spring, S4X roller helix
Top of page
